Heat Press Temperature Controller, SSR Or Relay Output

Introduction: The Lorentzzi LTTC700 product is a heat press controller that integrates PID temperature controller, timer and counter, which can be used in heat presses, hot stamping machines, disinfection equipment, etc. Its output can be a solid state relay (SSR) or relay output. If the output is a solid state relay output, it can be used to control our single-phase or three-phase DC control solid state relay. If it is a relay output, the switching capacity is 30 amps, which can directly drive heating elements below 3000W, and can also be used in conjunction with our AC control AC solid-state relay or AC contactor to control higher power heating elements. If you want to count the number of prints, this temperature controller with timer and counter will work too, the only thing you need to do is connect a proximity sensor to it and then once the machine goes from on to off it will count 1 time. In heating mode, you can press an external button to start the heating countdown, or you can use a proximity switch to start the countdown. When the time is up, the buzzer will sound and the time output relay will close. If you want to get our technical support or want to get its latest price, please fill out the form at the bottom to contact us! Specifications: Model LTTC700 Panel size 72*72 mm Product dimension 72*72*40 mm Cutout dimension 68*68 mm Main output SSR 12VDC, Relay 250VAC, 30 A Time relay output 3A@250VAC Time counting method Push button or proximity sensor WordPress Data Table Plugin