Introduction: Lorentzzi® DH48S-2Z is an on-delay time relay with two NO NC contacts. It works by delaying the normally open (NO) contact for a certain period of time when power is applied. For example, if the time is set to 5 seconds and an LED light is connected to the NO contact, once power is applied, the light will light up after 5 seconds and remain on. The setting time range is 0.01 seconds to maximum 99 hours 99 minutes. It is a non-repeating time delay, if you want a cyclic timer relay please check out our DH48S-S relay. DH48S-2Z has two installation methods: panel mounting(with a clamp) and DIN rail mounting(with the PF083A relay socket). You can choose the most suitable mounting method by yourself. The two contact capacity is 5 amps@220 VAC, which can directly drive 800 W resistive load. If a higher power load needs to be operated, an AC contactor or AC SSR can be used. Applications include load delay and sequential start-up, for example, delayed start-up of motors to reduce impact on the power grid, sequential control of welding and painting in automobile manufacturing, etc. Want to get DH48S-2Z DPDT Time Delay Relay pricing or technical support from us? Fill out the form below to contact us now! DH48S-2Z Timer Wiring: Speficications: Model DH48S-2Z Working voltage 36, 110, 220 or 380 Vac, 50/60 Hz; 12Vac/Vdc, 24Vac/Vdc Delay time 0.01S to 99H99M Contact form On-delay DPDT Tolerance -15%-10% at AC and -10%-10% at DC of rated supply voltage Power consumption 2W max Setting method Dial switch Indication method 8-segment 4-digital display External dimensions 48x48x110 mm(with relay socket) Contact rating 5A@220Vac, 5A@28Vdc Repeat accuracy ±0.3%, ±0.05 sec Setting error ±0.5%, ±0.05 sec Termination 8 pins Mounting Panel or DIN rail mounting Mechanical life 1x10^6 Electrical life 1x10^5 Operating temperature 0 to 50 °C Operating humidity 95% RH max, non-condensing WordPress Data Table Plugin
